Assessment Validation: A Detailed Guide to Validate Assessments

Assessment Validation: A Detailed Guide to Validate Assessments

Blog Article

After gaining registration, RTOs need to monitor several aspects including annual declarations, AVETMISS reporting, and marketing compliance, with validation being a major concern.

Although our articles cover validation extensively, let’s redefine it. According to ASQA, validation is a quality review of the assessment process.

In other words, validation identifies which elements of an RTO's assessment process are done right and which need improvement. A proper understanding of its key components makes the task less daunting.

The SRTOs 2015 Clause 1.8 specifies that RTOs need to ensure compliance of their assessment systems, including RPL, with training package requirements, following the Principles of Assessment and Rules of Evidence.

According to the standards, two types of validation must be conducted.

The primary type of assessment validation verifies that your RTO's assessment meets the training package requirements.

The next type of validation confirms assessments are carried out following the principles of assessment and rules of evidence.

This suggests we perform validation both before and after the assessment. This article will concentrate on the first type—assessment tool validation.

Breaking Down the Two Types of Assessment Validation

Clarifying Assessment Validation

As mentioned earlier and in one of our previous blog posts, validation is split into two stages: (1) assessment tool validation and (2) post-assessment validation.

Pre-assessment validation, or assessment tool validation, is concerned with the first part of the clause, which ensures all unit requirements are met and that workbooks are fully compliant.

Post-assessment validation, by contrast, focuses on implementation, ensuring Registered Training Organisations conduct assessments in line with the Principles of Assessment and Rules of Evidence.

In this article, we will emphasize assessment tool validation.

How Assessment Tool Validation is Conducted

Having outlined the two types of validation, it’s time to dive into assessment tool validation.

When to Conduct Assessment Tool Validation

The objective of assessment tool validation is to ensure that all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.

Thus, whenever new learning resources are purchased, you must conduct assessment tool validation before allowing student use.

There's no need to wait for your next 5-year cycle validation schedule. Validate new resources immediately to ensure they are suitable for student use.

However, this isn't the only instance to conduct this type of validation. Perform assessment tool validation when you:

- resources are updated
- adding new training products on scope
- you review your course against training product updates
- learning resources are identified by you as a risk during your risk assessment

ASQA's risk-based regulation approach means RTOs should perform regular risk assessments. If students complain about learning resources, it's a perfect time for assessment tool validation.

What Training Products Should Be Validated?

Keep in mind, this validation ensures compliance of all learning resources before use. All RTOs must validate resources for each unit.

Getting Started with Assessment Tool Validation: Resources Needed

Course Materials

For validating your assessment tools, you will need the full array of your learning resources:

Mapping tool – start with this document. It illustrates which assessment items address unit requirements, making validation quicker.

Learner/student workbook – validate its suitability as an assessment tool. Ensure instructions are clear and answer fields are adequate. This is a frequent gap.

Assessor guide/marking guide – check that there are sufficient instructions for assessors and clear benchmarks for each assessment item. Clear benchmarks are vital for reliable assessment outcomes.

Other related resources – may consist of checklists, registers, and templates created separately from the workbook and marking guide. Validate them to ensure they are appropriate for the assessment task and address unit requirements.

Validation Committee

Clause 1.11 outlines the requirements for validation panel members, noting that validation can be done by one or more people. Typically, RTOs require all trainers and assessors to attend and may invite industry experts.

Together, your validation panel should possess:

Vocational competencies and current industry skills that relate to the unit being validated

Recent expertise and skills in vocational teaching and learning

Any of the following training and assessment credentials:

TAE40116 Certificate IV in Training and Assessment or its future version

Validation instrument/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look Validate assessment tools Australia at how each assessment item maps against each unit requirement.
Having a validation tool helps in both the validation process and documentation. It makes it simpler to see how each assessment item aligns with each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it can provide proof that you have validated your resources before students use them.

Although ASQA does not recommend or require a particular template for assessment tool validation, many templates are available online. These tools typically have validators review the tools in their entirety to determine if they meet the principles of assessment.

Principles of Assessment Guide Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

While these templates facilitate the validation process, they can result in judgment errors due to the limited space for comments on each assessment item.

A more detailed template is recommended to thoroughly inspect each unit requirement and the assessment items that align with them. Below is an example:

Element Performance Criteria Assessment Instructions Standards Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Needs Checking?

As detailed in our blog post Common Problems In Assessment Tools, it is crucial that your assessment tools enable trainers to adhere to assessment principles and evidence rules.

Assessment Basic Principles
Fairness – Is equal opportunity and access provided to everyone in the assessment process?

Flexibility – Does the assessment offer various ways to demonstrate competence according to different needs and preferences?

Validity – Does the assessment assess what it is intended to assess? Is it a valid tool for measuring the required skill or knowledge?

Reliability – Will the assessment yield the same results each time, no matter who conducts the training? Will different assessors make consistent decisions on skill competence?

Essential Rules of Evidence

Validity – Does the evidence prove that the candidate possesses the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there enough evidence to confirm the learner has the required skills and knowledge?

Authenticity – Does the assessment tool ensure that the work belongs to the candidate?

Currency – Do the assessment tools reflect current units of competency and modern industry practices?

Although these are often addressed in VET professional development and nationally recognised training, numerous tools fail to meet these requirements.

To prevent using learning resources that fail to address some unit requirements, ensure you follow these guidelines:

Practice Your Teachings

Pay close attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:

Carry out each of the following at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication as per service and regulatory requirements:

change diapers

prepare bottles, feed infants from bottles, and clean equipment

prepare solids and feed infants

respond appropriately to baby signs and cues

prepare and settle infants for rest

monitor and promote age-appropriate physical exploration and gross motor skills

Having students describe changing nappies for babies under 12 months doesn’t directly fulfill the unit requirement. Unless it’s intended to assess underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.

Be Cautious with Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Pay attention to the numbers. In our CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t enough.

Full Compliance or Not Competent

Observe the lists. As illustrated above, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Can You Clarify Further?

Each assessment item must have clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Therefore, it’s crucial that your instructions do not confuse students or assessors. For instance:
What kind of information can be included in a work package?
What can be included in a work package?

Answers may include:

Compulsory resources

Associated costs

Activity length

Allocated duties and responsibilities

If an assessment item requires multiple answers, specify how many answers are needed from a student. This ensures your assessment is reliable, and the evidence obtained is valid.

The same applies to assessment items with double-barrelled questions or those requiring multiple answers simultaneously. These can confuse students and assessors, as demonstrated in the sample question below:

Identify a hazard and/or environmental issue in the workplace and select the most effective hazard control hierarchy.

Answers might include, but are not limited to:

Weather conditions – isolation of work area, engineering controls, personal protective equipment

Work area and ground conditions – eliminating hazards, isolation, use of engineering controls

People – isolation, engineering, administrative controls

Structural hazards – substituting, isolation, use of engineering controls

Chemical hazards – isolation, engineering controls, administration

Equipment or machinery – isolation, engineering, administrative controls

Avoiding double-barrelled questions makes it easier for students to respond and for assessors to accurately judge student competence.

Considering these requirements, you might think, “Don’t learning resource developers have audit guarantees?” But such guarantees require you to wait for an audit before rectifying noncompliance. This affects your compliance history, so it’s better to take a safe and compliant route.